Dead APIM Sync 3

Log in to reply

Home Forums Technology In-Car Entertainment Dead APIM Sync 3

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #169377

    gui lle
    Participant

    USA

    Posts: 0

    Hi,

    After a road trip of ~2hrs, I parked and once I started the engine again after 15 mins, the module never came up. I took it to the official Ford service (in Argentina) and they did not know what to do. They just said it didn’t respond to the scanner tool.

    I know it’s the APIM and nothing else, as I tried other modules likeĀ Ford Fiesta (plugging fewer cables only), SYNC 2 module, and audio system works, reverse camera works, etc.

    I ended up purchasing a used APIM module, which also brought the FDIM (screen). I swap my screen with that ‘new’ screen’ and my screen also works.

    So it’s the APIM module.

    What could I try to test it?
    I connected ForScan and it is able to read and write AS BUILT values from it, even if it’s not on (screen is black).

    I tried to search for ways to ‘re-flash’ binary files, but I did not find any reference whether that is possible or not.

    Any help or hint iis welcome!

    Thanks.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to Dead APIM Sync 3. If you're not already a member then you can register for free!