One For 71BDA
Log in to reply- This topic has 0 replies, 1 voice, and was last updated 5 years, 11 months ago by
.
-
New Ford Performance 1.6 Kent Block
M-6010-16K
1.6 LITER 4 CYLINDER KENT BLOCK
The legendary Formula Ford Kent block is reborn with an all new iron casting that is stronger than the original! The block was designed to replace production 1.6L Kent blocks for SCCA Formula Ford competition.
Standard 8.200″ deck height with extra material for decking
Cylinder bores semi-finished to 3.185″ – 3.187″ diameter to allow the engine to be built to desired clearances
Max bore size is 3.226-inch / 81.94mm
Lifter bore diameter: .5155″ – .5145″Block cast from 40,000 PSI grey iron
Lower clutch housing bolt bosses reinforced
Select areas around main bearing webs strengthened
Center main will accept upper and lower crankshaft thrust bearing inserts
Includes cam bearings (Installed)
RS Edition.
FPM375 Rocks
The rest of the “M” maps suck
