Spring Heights (Actual)

[white-rs2]

Does anyone or could some one measures the Front & Rear actual height from the floor, threw the centre cap to the arch lip please.

Front (mm). Rear (mm)

H&R

Mountune

Eibach

Whiteline

Other

---

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

[71-bda]

I will kick off with dead std @ 5500 miles, drivers side,quarter tank of fuel , tyre pressures at 38f 36R and pretty much unworn tyres..

Front 656mm

Rear 676mm

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[white-rs2]

Thank you BDA ?

---

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

[white-rs2]

Mountune Springs

Front 655mm

Rears 665mm

The Fronts on the Mountune are almost identical to standard springs bar 1mm  lower. The rears are 11mm lower than standard to give that equal heightvlook F&R

---

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

[Luke Flowers]

Has anyone got the measurements for the H&R or Eibachs?

[marty_rs]

Its interesting that the standard and mountune are that similar. If I were to change the springs I’d definitely consider the mountune knowing that….if they’re in stock ??

[GM]

I have the Eibachs will check tomorrow ?

[GM]

bit of a delay ?

Mine on Eibachs are 640mm front and rear, H&R bars on low hole setting if that makes a difference??

[Author]

Posts