Sync 3 3.4 & F8

Log in to reply

This topic contains 6 replies, has 5 voices, and was last updated by RS77 RS77 1 month ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #130009
    jimbojambojumbo
    jimbojambojumbo
    Participant

    UK - England

    Posts: 102

    Updated my sync 3 to 3.4 and have working calm screen and radio station logos system boots faster and goes through the menus a lot quicker I love the night mode view

    this isn’t something everyone can get doing as some firmware files need changing to get logos and calm screen working and you can’t do that with usb updates. This version also has changeable wallpaper but only from 4 pre installed wallpapers.

    Anyone wanting this installed prepared to travel to me(Thurrock) it takes around an hour to install £40

     

     

     

     

    #130029

    jonyscam
    Participant

    UK - England

    Posts: 215

    can you post some contact details?

    #130033
    white-rs2
    white-rs2
    Participant

    UK - England

    Posts: 3308

    Are you able to keep the Ford Performance/ RS logo screen on engine start up



    RS Edition (RED),

    Standard as Ford Should of Intended.

    #130048

    jonyscam
    Participant

    UK - England

    Posts: 215

    agreed white… are you????

    #130051
    RS77
    RS77
    Participant

    UK - England

    Posts: 1226

    Does this fix the reversed climate controls/temps on the screen? I heard this might not be possible without a wiring mod.

    #130105
    nitemare
    nitemare
    Participant

    UK - N.Ireland

    Posts: 28

    I’ve done the mod too …

    You need 2 USB sticks and UCDS software/cable as you need to update the APIM module to have FULL functionality!!

    Ford RS splash screen as before and NO the Climate is still reversed (as you can see in pic in post #1)



    2017.5 RS MG FPM375

    • This reply was modified 1 month ago by nitemare nitemare.
    #130116
    RS77
    RS77
    Participant

    UK - England

    Posts: 1226

    Where did you get the files from? What do you need to change on the APIM? Thanks.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.

Login or register below to contribute to Sync 3 3.4 & F8. If you're not already a member then you can register for free!