TAROX two piece discs for the Mk3 Focus RS are a direct replacement for OE part number 1936713.
These uprated discs are part of their special ‘Bespoke’ range. The TAROX ‘Bepsoke’ discs are never made in a cast, they are all individually CNC machined from a solid piece of steel billet. Once the billet has been machined to the required size it is heat treated and then cooled to unify the structure of the steel and improve strength and durability. This keeps the disc more stable at extreme temperatures. Characteristics such as warping, cracking, fade and knock off are all massively reduced and pad and disc life is extended dramatically. The toughened disc is then grooved and/or drilled as required and finally finished by hand. Each disc is manually ground to a tolerance approaching 0.015mm creating a perfectly level surface to ensure that the discs will run true. With these being a two-piece disc, the billet rotor is then mated to a CNC machined alloy bell which has been hard anodized.
The Ultimate Tensile Strength for these discs is rated at 57kg per square mm. To put this figure into perspective, the standard for racing spec discs is usually 38kg per square mm and the CEE standard U.T.S. is 25kg per square mm.
The Focus RS Mk3 ‘Bespoke’ discs are made to order and are available as F2000, Sport Japan, D95 or with a plain surface called Zero.
|Minimum Disc Thickness||23|
|Offset (Disc Height)||49|
|Centre Bore Diameter||64|
|Stud Hole Arrangement||5|
Part number: FORD-S2-2 / S2-2901