Custom air feed project

Log in to reply

Home Forums Performance Cooling Custom air feed project

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #65402

    Laren Guthrie
    Participant

    Australia

    Posts: 31

    Hi guys,

    I’ve purchased a 1m length of 2-ply/80mm neoprene ducting to run a cold air feed to my Mountune intake.

    Aiming to do something similar to what the Eventuri system has on offer utilizing the cavity in the under tray rather than the Velossa Tech application. Was wondering if someone has the dimensions of that under tray opening before I either buy or have a funnel fabricated (something like the pic below).

    If someone has their car up on a hoist shortly or already has the dimensions of the opening, I’d greatly appreciate those being passed on.

    Cheers!

    #65407

    Kenny
    Keymaster

    UK - Scotland

    Posts: 3885

    Sounds like an interesting project.

    So using the blue part and some tubing?

    #65420

    RS77
    Participant

    UK - England

    Posts: 1271

    Need to be careful you don’t make it worse by introducing more surface friction/torturous route that reduces the air intake. Good luck!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to Custom air feed project. If you're not already a member then you can register for free!