Forging

[peters]

If you have got your RS forged where did you get the bits, who done the work, and most important would you recommend them ?

 

 

---

Its back !

 

[white-rs2]

https://www.focusrsoc.com/forums/topic/367401-forging-the-engine-options/

---

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

[peters]

Would love to read but not a member there, got fed up with a couple of very opinionated people, this is a much better site !

---

Its back !

 

[brembo]

@peters

Morning mate!! I don’t have mine Forged yet, but I will!!

Devil Developments will Forge your Engine, uprated Cylinder Head Gasket, Studs, Pistons and Conrods!! Prices start at £2599.

Cheers, Marc.

---

MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

[peters]

@Brembo

Thanks for that, Devil is where i am thinking of going to get the work done, just wanted to see if there was anyone closer that was recommended.

Mountune is another, but the prices are slightly more eye-watering.

 

---

Its back !

 

• This reply was modified 5 years, 3 months ago by peters.

[Hammy]

 

h/www.dreamscience-automotive.co.uk/product/rs-mk3-engine-forge-kit/

 

 

---

• Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
• Dreamscience Imap Ultimate 3+
• Dmb Gel Badges Nitrous Blue
• Rallyflapz Kaylan Black 
• Team Heko Wind defectors Dark 
• Dreamscience turbo back exhaust with race car.
• Airtec SSC Black
• Airtec Stage 2 Air Intake Black & Nitrous Blue 
• Airtec Rear Diffuser Black 
• ST suspension 12.5mm spacers
• Forge recirculating valve
• yellow fog lights 
• Airtec Nitrous Blue rear diff cooler 
• 10% tint on rear lights 
• Satin black window louver vents
• Airtec short shifter set @ 40%
• Valve delete mod
• Bonnet struts 
• Solid shifter bushes 
• 1 step colder spark plugs NGK 
• Engine dress up screw kit
• body colour coded washer jets 
• Airtec intercooler
• Airtec boost pipes
  
• Clubsport 4 point roll cage in nitrous blue
  
• 3 point securon harness x2 
• Driver side JCR lowered seat rail 

[brembo]

@hammy

Nice one mate!! Didn’t realise Dreamscience did that?! Even when you spec all the options it still comes in under £4,000. Those  Boostline Conrods look the dogs nuts, good for 800BHP, now that’s peace of mind!! ?.

Cheers, Marc.

---

MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

[peters]

@hammy

 

cheers i didn’t know they done forging either

---

Its back !

 

[Ukjon]

Mountune for me:

1. Are not far from me, should I have any “issues” then I can take the car straight back!

2. I would like to think that having been by Ford’s side since 1980, their knowledge and expertise  with regard to the 2.3 Ecoboost should be second to none.

Devil Developments was my second choice.

Regards

 

[jonyboy]

Mountune for me

Same reasons as above

[white-rs2]

Mountune being around since 1980 has no bearing on the Ecoboost knowledge base as that engine hasn’t been.

 

---

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

[jonyboy]

Mountune would have had much more inside technical knowledge of the eco boost engine due to their close association with ford motor company

[GM]

Not sure if ford are competent when it comes to the 2.3 eco boost engine…. HG recalls and revisions in procedure since?

So not sure if they are worth having by your side? ?

[Author]

Posts