Mk3 hood in trunk?

[frs3425]

Hi!

Does the mk3 hood fit the rear trunk/boot of the car?

Best Regards, Per-Anders.

[71-bda]

maybe just measure the bonnet and then the tailgate aperture, at its widest diagonals. I would think.. YES !! with both front seats possibly set a bit forwards.

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[frs3425]

I have measured, but not sure. It seems very tight. Is going to pick up a hood tomorrow, but don’t want to gamble…

 

[walker-steve77]

I’d be surprised if it fits.

---

Nitrous Blue, Lux Pack, Blue Brembo Brake Calipers, SYNC 3, Black Forged Alloys & Door Edge Protectors

Stage 1 + many extras

[coastliner]

Me too, you will only know when you try. Best hire ir borrow a van.

---

Coastliner

[71-bda]

you put it in sideways. bonnet length from back to front is less than the diagonal width of the aperture . Go and do a proper measure up, will take less than 3 minutes.

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[Ryan Fleming]

Ive done this in mine. It fits absolutely fine with room for other stuff if need be too.

[71-bda]

Thankyou Ryan ! in sideways innit.

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[frs3425]

Just want to confirm that it fits without any problems… 😉

[jamors]

L O L

[Author]

Posts