Mountune bits fitted

[mexicoian]

[mexicoian]

[mexicoian]

Anyone fitted the oil cooler , give me some pointers in the right direction mountune sent no instructions ??

[white-rs2]

Looking Rather Tastie Mr Ian

---

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

[71-bda]

very nice Ian !  were you not tempted to highlight the Mountune wording and stripes on your blue intakes? I would have to hand finish that after painting..

!

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[jonyscam]

nice BDA… i need to see your other car!

• This reply was modified 5 years, 5 months ago by jonyscam.

[mexicoian]

Unfortunately 71-bda I wasn’t blessed with a very steady hand ??

[Kenny]

Very nice! Looking like a Mountune demo car 😉

[71-bda]

Ian, you dont paint the wording, you get something flat like a metal file, wrap some course emery paper round it and polish away the paint , then the Ali, gradually using finer grade until you get the finish you want.

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[white-rs2]

The ECUs on these Mk3 RS are really quite locked down by Ford.

Normally changing intercoolers, airflow pipes, exhausts etc all add power but with this ECU they seem only to support the map to achieve its target and “not” to exceed that figure.

So if you have all the Stage2 supporting mods with an FPM375 kit you’ll still only get 375, but you’ll probably be able to achieve that all day long.

In a similar way if you have a 400bhp map and all the supporting mods you’ll still only be 400 but will be able to run that for a far greater time safely and without the car backing off the timing and boost to protect itself.

Also the supporting hardware does look pretty ??

---

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

[mexicoian]

Cheers 71-bda might just give that ago , ??

[71-bda]

Ian, heres some more I prepared earlier as they used to say on Blue Peter!

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[mexicoian]

Mountune Oil cooler and big mouth fitted , fingers crossed bumper fits ?? , think 1st time this has bin tried not seen another could be wrong wont be 1st time ?‍♂️?‍♂️

[elliot]

Nice work, got a big mouth and breather plate to fit.

How long a job for the breather plate?

Cheers,

 

Ian

---

 

 

[71-bda]

very cool Ian ! Or should I say hot! The poor engine coolant radiator gets fed hot air through from the intercooler, oil cooler, air con radiator and somehow is expected to cool the coolant down, its a wonder these cars don’t run real hot all the time, or maybe they do ! Have you thought about radiator upgrade while all that lots being done?

---

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

 

[Author]

Posts