Power flex mounts

Log in to reply

Home Forums Performance Engine Power flex mounts

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #183158

    Justcos
    Participant

    UK - Scotland

    Posts: 76

    I’ve been thinking about getting these mount inserts for my car after watching Adam Raineys install video. I’d like to hear you guys opinions on them before I spend the money. Are they a good idea or a waste of time?



    2017 nitrous blue

     

    #183159

    white-rs2
    Participant

    UK - England

    Posts: 4832

    Stay away from the black unless you track a lot they are very hard compared against the yellow or purple



    RS Edition.

    FPM375 Rocks

    The rest of the “M” maps suck

    #183187

    Justcos
    Participant

    UK - Scotland

    Posts: 76

    I’ve gone for the purple and yellow engine mount but black for the gearbox mount.



    2017 nitrous blue

     

    #183188

    white-rs2
    Participant

    UK - England

    Posts: 4832

    You could always send the black back for an exchange. It will just transmit vibration into the car



    RS Edition.

    FPM375 Rocks

    The rest of the “M” maps suck

    • This reply was modified 3 years ago by white-rs2.
    #186899

    Justcos
    Participant

    UK - Scotland

    Posts: 76

    Thought I’d update this thread  I fitted both the yellow powerflex engine and gearbox mounts. I was getting a very slight vibration at idle but after fitting my Airtec lower gearbox mount last night the vibration is hardly noticeable so I’m happy about that. Im going to buy and fit the three powerflex rear diff mount bushes aswell  😁



    2017 nitrous blue

     

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to Power flex mounts. If you're not already a member then you can register for free!