Scorpion Decat fitted with spacers now EML ??
Log in to replyHome › Forums › Performance › Exhaust › Scorpion Decat fitted with spacers now EML ??
- This topic has 15 replies, 6 voices, and was last updated 5 years, 9 months ago by
Turns.
-
AuthorPosts
-
March 13, 2019 at 6:30 PM #115062
As the title suggests, i fitted a scorpion decat DP with spacers for the 02 sensors to the car over the weeekend. 100mile later & I now have EML ? I bought the decat used with spacers supplied so they are straight spacers about 1 1/2” in length, I had thought it was elbow spacers needed but didn’t question it as it was used. After fitting decat I upload DS Ultima 2+ & haven’t yet plugged in to reset eml etc. So question is, any one experienced this before , if I reset via the accessport will the light return? Thanks for help guys.
March 13, 2019 at 7:30 PM #115068never and I have had de cat on since the day after I picked it up from new and what is this spacer your on about for o2?
- Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
- Dreamscience Imap Ultimate 3+
- Dmb Gel Badges Nitrous Blue
- Rallyflapz Kaylan Black
- Team Heko Wind defectors Dark
- Dreamscience turbo back exhaust with race car.
- Airtec SSC Black
- Airtec Stage 2 Air Intake Black & Nitrous Blue
- Airtec Rear Diffuser Black
- ST suspension 12.5mm spacers
- Forge recirculating valve
- yellow fog lights
- Airtec Nitrous Blue rear diff cooler
- 10% tint on rear lights
- Satin black window louver vents
- Airtec short shifter set @ 40%
- Valve delete mod
- Bonnet struts
- Solid shifter bushes
- 1 step colder spark plugs NGK
- Engine dress up screw kit
- body colour coded washer jets
- Airtec intercooler
- Airtec boost pipes
- Clubsport 4 point roll cage in nitrous blue
- 3 point securon harness x2
- Driver side JCR lowered seat rail
March 13, 2019 at 7:44 PM #115070Spacers for the O2 sensors, so that the reading don’t change as much when decat is fitted there for not needing to map out the second second as you would normally.
March 13, 2019 at 10:21 PM #115090I have a decat and I don’t have any spacers and not mapped out so you are clearly doing something wrong.
- Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
- Dreamscience Imap Ultimate 3+
- Dmb Gel Badges Nitrous Blue
- Rallyflapz Kaylan Black
- Team Heko Wind defectors Dark
- Dreamscience turbo back exhaust with race car.
- Airtec SSC Black
- Airtec Stage 2 Air Intake Black & Nitrous Blue
- Airtec Rear Diffuser Black
- ST suspension 12.5mm spacers
- Forge recirculating valve
- yellow fog lights
- Airtec Nitrous Blue rear diff cooler
- 10% tint on rear lights
- Satin black window louver vents
- Airtec short shifter set @ 40%
- Valve delete mod
- Bonnet struts
- Solid shifter bushes
- 1 step colder spark plugs NGK
- Engine dress up screw kit
- body colour coded washer jets
- Airtec intercooler
- Airtec boost pipes
- Clubsport 4 point roll cage in nitrous blue
- 3 point securon harness x2
- Driver side JCR lowered seat rail
March 14, 2019 at 8:15 AM #115099Well your help is really appreciated ! You have a Milltek, slightly different design so outcome may vary. Did you happen to fit it urself ? I can see your mechanical knowledge wouldn’t be great (one of time “YouTube Certified Guys”) so i’ll wait for a better response.
March 14, 2019 at 8:27 AM #115100I’ve got my chair and popcorn at the ready ???????
RS Edition.
FPM375 Rocks
The rest of the “M” maps suck
March 14, 2019 at 8:39 AM #115103maybe try the 2nd the sensor without the spacer as I’m sure the DS map just ignores the 2nd sensor but may need it instream for some reason or other? I dont think you want the first sensor spaced with the ds map too? tried disconnecting battery for a few minutes ?
No nothing.
No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.
No tackiness.
Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.
Innit?
March 14, 2019 at 8:57 AM #115105Your the twat that needs help not me. And for your small Irish brain did it all my self patato. Well maybe you should have bought a milltek and you would not have all this fucking about with spacers( your words not mine) what’s the saying buy cheap buy twice. For my mechanical knowledge. no I know fuck all just been a subsea engineer for twenty years. And to correct your pathetic engineering it’s not a spacer it’s a male X female extension fitting stupid prick. Now jog on mate and play About with your spacers.
- Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
- Dreamscience Imap Ultimate 3+
- Dmb Gel Badges Nitrous Blue
- Rallyflapz Kaylan Black
- Team Heko Wind defectors Dark
- Dreamscience turbo back exhaust with race car.
- Airtec SSC Black
- Airtec Stage 2 Air Intake Black & Nitrous Blue
- Airtec Rear Diffuser Black
- ST suspension 12.5mm spacers
- Forge recirculating valve
- yellow fog lights
- Airtec Nitrous Blue rear diff cooler
- 10% tint on rear lights
- Satin black window louver vents
- Airtec short shifter set @ 40%
- Valve delete mod
- Bonnet struts
- Solid shifter bushes
- 1 step colder spark plugs NGK
- Engine dress up screw kit
- body colour coded washer jets
- Airtec intercooler
- Airtec boost pipes
- Clubsport 4 point roll cage in nitrous blue
- 3 point securon harness x2
- Driver side JCR lowered seat rail
March 14, 2019 at 9:09 AM #115107and the fireworks commence 🙂
RS Edition.
FPM375 Rocks
The rest of the “M” maps suck
March 14, 2019 at 9:10 AM #115108You seriously are that dumb that’s you don’t understand that a decat is just a piece of stainless steel tube bent and welded with port holes. Your statement excels how much of a failed human you are bought it second hand and did notice something wrong but never questioned it now your monaning on here because you need help. Fuck off spud.
- Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
- Dreamscience Imap Ultimate 3+
- Dmb Gel Badges Nitrous Blue
- Rallyflapz Kaylan Black
- Team Heko Wind defectors Dark
- Dreamscience turbo back exhaust with race car.
- Airtec SSC Black
- Airtec Stage 2 Air Intake Black & Nitrous Blue
- Airtec Rear Diffuser Black
- ST suspension 12.5mm spacers
- Forge recirculating valve
- yellow fog lights
- Airtec Nitrous Blue rear diff cooler
- 10% tint on rear lights
- Satin black window louver vents
- Airtec short shifter set @ 40%
- Valve delete mod
- Bonnet struts
- Solid shifter bushes
- 1 step colder spark plugs NGK
- Engine dress up screw kit
- body colour coded washer jets
- Airtec intercooler
- Airtec boost pipes
- Clubsport 4 point roll cage in nitrous blue
- 3 point securon harness x2
- Driver side JCR lowered seat rail
March 14, 2019 at 9:13 AM #115109You know what white-rs2 I am board of this piss nearly every second twat that posts on here is an expert if your such an expert why you asking for help.
- Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
- Dreamscience Imap Ultimate 3+
- Dmb Gel Badges Nitrous Blue
- Rallyflapz Kaylan Black
- Team Heko Wind defectors Dark
- Dreamscience turbo back exhaust with race car.
- Airtec SSC Black
- Airtec Stage 2 Air Intake Black & Nitrous Blue
- Airtec Rear Diffuser Black
- ST suspension 12.5mm spacers
- Forge recirculating valve
- yellow fog lights
- Airtec Nitrous Blue rear diff cooler
- 10% tint on rear lights
- Satin black window louver vents
- Airtec short shifter set @ 40%
- Valve delete mod
- Bonnet struts
- Solid shifter bushes
- 1 step colder spark plugs NGK
- Engine dress up screw kit
- body colour coded washer jets
- Airtec intercooler
- Airtec boost pipes
- Clubsport 4 point roll cage in nitrous blue
- 3 point securon harness x2
- Driver side JCR lowered seat rail
March 14, 2019 at 9:13 AM #115110Hit a nerve did I chap? Aaa Rig Rat are you, being a jock that would make sense. BOP’S & Chokes don’t really take a lot off knowledge to work on, bare in mind everything offshore is made to be strong & simple so Eejit‘s like urself can work on them. Anyways I can see you spend a lot off time on hear (no doubt on tower) so I will let you crack on and comment some useless info on someone else’s post.
March 14, 2019 at 9:19 AM #115111Cheers for ur advice man, gonna take a look it hear now. As reckon you could be right with the pre O2 sensor, can’t see the need for it. Also will plug it in and see what code is coming up, just wanted to see if anyone else had similar experience before investigating myself.
March 14, 2019 at 10:19 AM #115112It would be good if this forum gave an option to ignore posts from certain member you have no time for. On focusrsoc they have that option.
March 14, 2019 at 10:21 AM #115113I always thought being on a forum was to seek advice from other members and also help where you can. How wrong I am
-
AuthorPosts
