Login
Register

TRC splitter fitting

Log in to reply

Home › Forums › Styling › Exterior Styling › TRC splitter fitting

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 23, 2017 at 7:59 AM #19481

    prodrive305
    Participant

    United Kingdom

    Posts: 85

    Has anyone fitted one ? I am wondering if it’s easy enough and can be done without the car being on a ramp.

     

    Thanks

    January 24, 2017 at 2:55 PM #19622

    Ian Barker
    Participant

    United Kingdom

    Posts: 1048

    Has to be on a ramp.


    Fully forged running M400x

    January 24, 2017 at 3:31 PM #19625

    prodrive305
    Participant

    United Kingdom

    Posts: 85

    Have you fitted one yourself Ian ?

    If so does it involve drilling through the bumper or existing splitter ?

    Thanks

    January 24, 2017 at 4:32 PM #19628

    TubsRs
    Participant

    UK - Scotland

    Posts: 234

    there is useful information on the triple r website on how to fit splitters and skirts 🙂

    January 24, 2017 at 8:52 PM #19659

    Kenny
    Keymaster

    UK - Scotland

    Posts: 3885

    Triple R fitting guides:

    https://www.triplercomposites.com/fitting-guide

    Jacking the car up with axle stands would be ok but ramp just easier.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to TRC splitter fitting. If you're not already a member then you can register for free!

Login