Spring Heights (Actual)

This topic has 7 replies, 3 voices, and was last updated 4 years, 9 months ago by GM.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
February 25, 2019 at 10:03 AM #113694

white-rs2
Participant

UK - England

Posts: 4833

Does anyone or could some one measures the Front & Rear actual height from the floor, threw the centre cap to the arch lip please.

Front (mm). Rear (mm)

H&R

Mountune

Eibach

Whiteline

Other

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

February 25, 2019 at 10:32 AM #113698

71-bda
Participant

UK - England

Posts: 9271

I will kick off with dead std @ 5500 miles, drivers side,quarter tank of fuel , tyre pressures at 38f 36R and pretty much unworn tyres..

Front 656mm

Rear 676mm

No nothing.

No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

No tackiness.

Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

Innit?

February 25, 2019 at 11:12 AM #113704

white-rs2
Participant

UK - England

Posts: 4833

Thank you BDA ?

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

February 25, 2019 at 8:34 PM #113754

white-rs2
Participant

UK - England

Posts: 4833

Mountune Springs

Front 655mm

Rears 665mm

The Fronts on the Mountune are almost identical to standard springs bar 1mm lower. The rears are 11mm lower than standard to give that equal heightvlook F&R

RS Edition.

FPM375 Rocks

The rest of the “M” maps suck

March 15, 2020 at 12:16 PM #142303

Luke Flowers
Participant

UK - England

Posts: 1

Has anyone got the measurements for the H&R or Eibachs?

March 15, 2020 at 2:19 PM #142318

marty_rs
Participant

UK - England

Posts: 338

Its interesting that the standard and mountune are that similar. If I were to change the springs I’d definitely consider the mountune knowing that….if they’re in stock ??

March 15, 2020 at 10:09 PM #142349

GM
Participant

UK - Wales

Posts: 2841

I have the Eibachs will check tomorrow ?

March 28, 2020 at 3:02 PM #143231

GM
Participant

UK - Wales

Posts: 2841

bit of a delay ?

Mine on Eibachs are 640mm front and rear, H&R bars on low hole setting if that makes a difference??
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.

Please login or register to view this page.