Cyanlabs sync3.0 to 3.4

Log in to reply

Home Forums Technology In-Car Entertainment Cyanlabs sync3.0 to 3.4

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #197983

    davey-f
    Participant

    United Kingdom

    Posts: 213

    Anyone bit the bullet and used cyanlabs to update from sync 3 to sync 3.4

    Any issues



    Frozen White / Sunroof / Lux Pack / Sync 3 / M400X/ Forged Engine Internals / MT Oil Cooler Kit / Sports Cat downpipe with Cat Back V3 exhaust / high flow radiator / Cast Inlet Manifold / Quaife ATB / Wagner intercooler upgrade from MT / charge pipe V2 upgrade / Eibach brake hose kit / EBC discs and brake pads / Eibach rear spring kit / secondary intake kit / short shift / roll restrictor / PTU Brace / TWS Gunmetal alloys / 10W60 oil serviced & maintained by FJRS

    #197984

    davey-f
    Participant

    United Kingdom

    Posts: 213

    Cheers



    Frozen White / Sunroof / Lux Pack / Sync 3 / M400X/ Forged Engine Internals / MT Oil Cooler Kit / Sports Cat downpipe with Cat Back V3 exhaust / high flow radiator / Cast Inlet Manifold / Quaife ATB / Wagner intercooler upgrade from MT / charge pipe V2 upgrade / Eibach brake hose kit / EBC discs and brake pads / Eibach rear spring kit / secondary intake kit / short shift / roll restrictor / PTU Brace / TWS Gunmetal alloys / 10W60 oil serviced & maintained by FJRS

    #197985

    71-bda
    Participant

    UK - England

    Posts: 9257

    I’d probably end up doing nuclear warhead launch codes if I tried any of that malarky !



    No nothing.

    No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

    No tackiness.

    Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

    Innit?

     

    #198000

    rs-le
    Participant

    UK - England

    Posts: 373

    @davey f

    changed mine to 3.4 a while ago using cyanlabs,  I’m no expert , watched a couple of YouTube vids on how to do it, no issues so far, happy I did, looks & works better imo 😁

    #198001

    Gordon RS
    Participant

    UK - England

    Posts: 86

    Did mine about 2 years ago and done another RS and a mondeo no problems,also updated mine twice no bother

    #198019

    davey-f
    Participant

    United Kingdom

    Posts: 213

    Thanks. Downloaded manually onto USB as couldn’t find syn3 installer. Thought I had it sussed with the 3 folders as per cyanlabs website. Started installing 2 mins in then the screen of death (well red) saying couldn’t find one of the maps 1st of 18.

    Eventually found syn3 installer and watched lengthy you tube video.

    Upgrading from build  3.0 20204 to 3.4 23188 with 05/22 maps and voice updates. Download took 5 hours so will have another crack in a few days.

    If unsuccessful then I have no head unit screen so time for getting it replaced.

    If it not broke don’t fix it – tried 4 times trying to update F11 maps to F12 – error messages etc. Gave up and gave Cyanlabs a go.



    Frozen White / Sunroof / Lux Pack / Sync 3 / M400X/ Forged Engine Internals / MT Oil Cooler Kit / Sports Cat downpipe with Cat Back V3 exhaust / high flow radiator / Cast Inlet Manifold / Quaife ATB / Wagner intercooler upgrade from MT / charge pipe V2 upgrade / Eibach brake hose kit / EBC discs and brake pads / Eibach rear spring kit / secondary intake kit / short shift / roll restrictor / PTU Brace / TWS Gunmetal alloys / 10W60 oil serviced & maintained by FJRS

    #198031

    chrisch
    Participant

    UK - England

    Posts: 93

    No problems with Cyanlabs here to go from 3.0 to 3.4

    The only annoying thing is that it takes ages now to start playing DAB radio stations (takes about 20 seconds to play once you select the favourite). On the plus side, I now get directions by the speedo from Android Auto

    #198051

    davey-f
    Participant

    United Kingdom

    Posts: 213

    Did you all use the sync3 updater rather than manual



    Frozen White / Sunroof / Lux Pack / Sync 3 / M400X/ Forged Engine Internals / MT Oil Cooler Kit / Sports Cat downpipe with Cat Back V3 exhaust / high flow radiator / Cast Inlet Manifold / Quaife ATB / Wagner intercooler upgrade from MT / charge pipe V2 upgrade / Eibach brake hose kit / EBC discs and brake pads / Eibach rear spring kit / secondary intake kit / short shift / roll restrictor / PTU Brace / TWS Gunmetal alloys / 10W60 oil serviced & maintained by FJRS

    #198055

    bigdave
    Participant

    Australia

    Posts: 93

    I used the Cyanlabs to update from 3.0 to 3.4, took about 25 minutes to update the car, think it took longer to download the files. Android Auto directions in the information cluster is the main reason I updated.

    #198099

    robroy
    Participant

    UK - England

    Posts: 692

    I did some time ago ,no issues , followed Adam Rainey you tube vid

    #198269

    davey-f
    Participant

    United Kingdom

    Posts: 213

    Hi,

    All now installed via USB after using updater. Now F12 maps

    Question – is it best to keep USB with all the files I downloaded to convert from 3.0 to 3.4 in prep for any future sync / map updates or just re format the usb.

     

     

     

     



    Frozen White / Sunroof / Lux Pack / Sync 3 / M400X/ Forged Engine Internals / MT Oil Cooler Kit / Sports Cat downpipe with Cat Back V3 exhaust / high flow radiator / Cast Inlet Manifold / Quaife ATB / Wagner intercooler upgrade from MT / charge pipe V2 upgrade / Eibach brake hose kit / EBC discs and brake pads / Eibach rear spring kit / secondary intake kit / short shift / roll restrictor / PTU Brace / TWS Gunmetal alloys / 10W60 oil serviced & maintained by FJRS

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to Cyanlabs sync3.0 to 3.4. If you're not already a member then you can register for free!