What mods are needed for a 500+BHP build?

Log in to reply

Home Forums Performance General What mods are needed for a 500+BHP build?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #198888

    tobys
    Participant

    UK - England

    Posts: 51

    Hi all,

     

    As per title, in the next year or so I’m thinking of trying to get some more power out of the RS. Thinking 500BHP would be a good amount but just wondering what the car would need doing to it to make it reliably make that power and rough idea of cost.

    I know I’ll need a forged engine (although still looking for recommendations on what components I’d need and an idea of cost). Already have a cat back exhaust so suspect I’d need a sports cat too.

    What else is needed for this kind of power and what sort of cost?

    CheeRS



    Storm – ’17 Plate Stealth Grey MK3 Focus RS.

    • Collins Performance CP2
    • Lux Pack
    • Winter Pack
    • Standard Wheels (Powder Coated in Black) wrapped in Michelin Pilot Sport 4S
    • Standard Seats
    • Sony 10 Speaker Stereo
    • Nav & Reverse Camera
    • Shadow Black OEM Spoiler with Mountune Carbon Fibre Spoiler Lip
    • Mishimoto Cold Air Intake
    • Mountune Lowering Springs (10mm lower front, 15mm lower rear)
    • Mountune Roll Restrictor/Engine Mount
    • EBC Brakelines
    • Airtec Intercooler and Big Boost Pipe Kit
    • Scorpion Exhaust (with Daytona Tips)
    #198890

    turbo-tone
    Participant

    UK - England

    Posts: 1567

    Last time I spoke to Gary at Collins he was quoting just shy of 4k for the build, that was with the standard turbo though. Updated turbo for plus 500bhp would be extra. Give him a call and I am sure he will talk you through what the build spec is.



    Collins Cp2 map. Ramair induction. Mountune mud flaps. Scorpion Sports Cat. Scorpion Tracker. Wind deflectors. NB washer jets and shark fin aerial. EBC Grooved discs, YellowStuff pads. Airtec Intercooler, Miltek cat back with titanium tips. Collins quickshift. DSC Controller

    #198908

    white-rs2
    Participant

    UK - England

    Posts: 4831

    First mod would be to make sure you’ve got £15k ish ready to spend to achieve your figure, as quantity components are not cheap.



    RS Edition.

    FPM375 Rocks

    The rest of the “M” maps suck

    #198922

    robroy
    Participant

    UK - England

    Posts: 692

    I did mine is stages, get the engine forged first, but while your doing that get some cams fitted, saves on labour .

    I bought the turbo next, then after that I bought other parts required then eventually had it all  fitted, unless you can afford do it all in one go, as above your probably looking at around 15k

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to What mods are needed for a 500+BHP build?. If you're not already a member then you can register for free!