New Mountune Breather Plate RS Version

Log in to reply

Home Forums Performance Engine New Mountune Breather Plate RS Version

Viewing 15 posts - 1 through 15 (of 16 total)
  • Author
    Posts
  • #84478

    white-rs2
    Participant

    UK - England

    Posts: 4832

    NEW: Breather Plate – RS

    £148.99 Inc. VAT
    £124.16 Ex. VAT

    Maintain the peak engine performance of your Mk3 Focus RS whilst adding provision to neatly expand your oil breather to include a catch can system.

    It’s well documented that direct injection engines, like the 2.3-litre EcoBoost found in the Focus RS, create oil vapour from the crankcase and cylinder head which is normally recycled back through the air intake system. This vapour can create a buildup of carbon deposits on the intake valve that reduce engine performance.

    Additionally, the oil vapour can accumulate on the intake hoses, turbocharger, intercooler, and intake tract over a period of time, slowing airflow and thereby further reducing performance. For optimised engine performance, the oil should be removed from the vapour before it reaches the engine’s intake system.

    The mountune Mk3 Focus RS breather plate directly replaces the original engine block plate and features a substantial increase in baffle surface area over the original part.

    The labyrinth-style baffle has been machined into the oil breather plate itself, substantially increasing the surface area compared to OE, which allows more crankcase vent vapour to be trapped and remain in the crankcase where it belongs.

    Additionally, the route the oil vapour takes on its way to the intake manifold has been significantly increased through the labyrinth design, resulting in an increase of deflection areas. At each deflection point, additional oil is removed from the vapour.

    Installation is easy and, while not required, the mountune Focus RS breather plate also includes two ports to allow easy integration of many catch can systems on the market.

    This part is a must-have for higher boost / high performance applications.

    Features
    • Designed and optimised for modified 2.3-litre EcoBoost engines
    • Direct replacement
    • Easy installation
    • Machined from solid aluminum with a precision machined labyrinth-style baffle
    • Twin ports facilitate easy installation of a catch can system



    RS Edition.

    FPM375 Rocks

    The rest of the “M” maps suck

    #84493

    tichy-cosworth
    Participant

    UK - Wales

    Posts: 180

    Shame there sold out not like mountune

    #89346

    RS77
    Participant

    UK - England

    Posts: 1271

    Had this fitted for a few hundred miles now and noticed a significant reduction in soot on the tail pipes.

    #89357

    Ian Barker
    Participant

    United Kingdom

    Posts: 1048

    Got mine from mountune USA long time ago, will be fitted along with all my other goodies on the 11 June ?



    Fully forged running M400x

    #89361

    white-rs2
    Participant

    UK - England

    Posts: 4832

    @Ian Barker

    I thought Mountune USA used the UK ST Breather plate, not the recently released RS version

     

     



    RS Edition.

    FPM375 Rocks

    The rest of the “M” maps suck

    #89385

    mexicoian
    Participant

    UK - England

    Posts: 959

    Got mine fitting this weekend now the head gasket is done ?

    #90307

    grethch
    Participant

    Germany

    Posts: 22

    Hi Mexicoian,

    Where did you get the Rs plate? At the mountune page the plate is always sold out.

    #90310

    Sennaboy
    Participant

    UK - England

    Posts: 350

    Mine arrived from scc had eight in stock Mountune never get back to you when available

    fitting on the 11th June



    #90312

    71-bda
    Participant

    UK - England

    Posts: 9258

    I like a bit oil being blown in past the inlet valves, it used to be called ” upper cylinder lubrication” !! Get yer top compression piston ring some lube. Many folk used to add redex etc to do it.



    No nothing.

    No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

    No tackiness.

    Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

    Innit?

     

    #90325

    mexicoian
    Participant

    UK - England

    Posts: 959

    <!–more–>hi grethch got it from mountune said out off stock but when i rang them they had one ??

    #90328

    Ian Barker
    Participant

    United Kingdom

    Posts: 1048

    There was one on eBay last week



    Fully forged running M400x

    #90351

    RS77
    Participant

    UK - England

    Posts: 1271

    Happy to report after hundreds of miles since fitting, exhaust tips are clean as a whistle. Used to get loads of soot.

    #90370

    crocket81
    Participant

    UK - England

    Posts: 469

    Think I need to get one of these, fitted my mountune secondary air intake yesterday and found lots of oil in the intake piping, wish they weren’t out of stock all the time?

    #99402

    coupe20vt
    Participant

    UK - England

    Posts: 31

    Do you need to drain the oil to fit this part?

    #99439

    JohnD
    Participant

    UK - England

    Posts: 748

    No, but you do need to remove the inlet manifold which takes care due to the various connections.

     

    JohnD

Viewing 15 posts - 1 through 15 (of 16 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to New Mountune Breather Plate RS Version. If you're not already a member then you can register for free!