This topic contains 16 replies, has 10 voices, and was last updated by jonyboy 1 week, 1 day ago.
UK - England
Bonnet vents, yeh or nae? whats peoples thoughts and any if anyone has fitted them could you please post some photos for inspiration. Cheers paul.
Old school louvred punch into new bonnet
@paul, if you go the header bar click on forums go down to Exterior styling scroll down to Bonnet vents and have a read.
That would be my preferred option, not keen on a colour contrast or carbon fibre. For me the colour coded ones look classier. My only worry is the air filter taking in rainwater which isn’t good. So positioning would be key.
No problems with water issues, as only come out on dry days 🤪
UK - Scotland
Evening mate!! Apologies for going off topic, but what front splitter is that?? I may have asked you this before, but can’t remember, lol!!
MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3.
TRC splitter with blue pinstripes
I think the RS really suits bonnet vents
Has the best louves by a country mile 👍
Two points really security – a scrout can’t yank them out and plenty of them their louves to pull out all that hot air so a win win for me 👍
RS Edition (RED),
Standard as Ford Should of Intended.
@ian barker – oh, they’re nice. Proper nice.
Who did the and how much?
Nitrous Blue FPM375
New bonnet £275
louvers punched £100
bonnet sprayed £200
as of August 2018
been told louvers are now £140
done in the West Midlands Area
i have contact number if you’re interested
Mountune Venus are positioned where the engine compartment generates the most heat
Mountune position where theirs the most heat ??
So why aren’t they positioned above the turbo at the back middle of the bonnet. It must get the hottest as that’s the only part that glows translucent orange on mine.
I really can’t see the air filter on one side and the expansion bottle on the other generating that much heat 😂😂😂😂😂
You must be logged in to reply to this topic.
Login or register below to contribute to Bonnet vents?. If you're not already a member then you can register for free!