Dream Science Ultima Remap.

Log in to reply

Home Forums Performance Electronics/ECU Dream Science Ultima Remap.

Viewing 14 posts - 136 through 149 (of 149 total)
  • Author
    Posts
  • #81608

    ipwnswiss
    Participant

    Switzerland

    Posts: 242

    Hammy : I just had mail contact with Jared from DS to ask about if there will be a LC update and so on. He told me I can use DS Ultima 2+ with no worries for STOCK car. But it would perform better with all the mods. Just as information to all reading here and still running stock car. go for it.

    Updated it too and it is just the best map so far. Except the tune I also have some mods like exhaust system, front intercooler plate removed, air filter modifications.

    Forgot to turn off the drift mode after a drive in the snow and was going to a street change to the left and was just rolling and pulled then 2nd gear with around 1500 rpm… and went sideways more or less like a powerslide. makes a lot of fun because now I do not have to lock the wheel in one direction and then floor it to get it sideways. with that map it is easy to powerslide the car even with low rpm because… the map is just insane? 😀



    Ford Focus RS / frozen white / fifteen52 tarmac / lowering springs kw / milltek exhaust / exhaust valve deleter / K&N airfilter / Maxton rear upper spoiler / Mishimoto oil cooler / Auto specialist 40% short shifter /

    #82241

    blechdosenbill
    Participant

    Germany

    Posts: 103

    @iPWNswiss

    Would it be possible that you write me an email to:  Blechdosenbill@gmx.net

    So we could talk maybe in German. I got some questions i want to ask you about it but my english isnt that good 😀

     

     

    #82800

    ipwnswiss
    Participant

    Switzerland

    Posts: 242

    done buddy 😉



    Ford Focus RS / frozen white / fifteen52 tarmac / lowering springs kw / milltek exhaust / exhaust valve deleter / K&N airfilter / Maxton rear upper spoiler / Mishimoto oil cooler / Auto specialist 40% short shifter /

    #84317

    Ronaldinio
    Participant

    UK - England

    Posts: 61

    Would you guys recommend this over say Revo stage one as I would like to liven the car up a little.

    #84350

    Hammy
    Participant

    UK - Scotland

    Posts: 649

    all the maps are more or less the same no matter what brand



    • Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
    • Dreamscience Imap Ultimate 3+
    • Dmb Gel Badges Nitrous Blue
    • Rallyflapz Kaylan Black 
    • Team Heko Wind defectors Dark 
    • Dreamscience turbo back exhaust with race car.
    • Airtec SSC Black
    • Airtec Stage 2 Air Intake Black & Nitrous Blue 
    • Airtec Rear Diffuser Black 
    • ST suspension 12.5mm spacers
    • Forge recirculating valve
    • yellow fog lights 
    • Airtec Nitrous Blue rear diff cooler 
    • 10% tint on rear lights 
    • Satin black window louver vents
    • Airtec short shifter set @ 40%
    • Valve delete mod
    • Bonnet struts 
    • Solid shifter bushes 
    • 1 step colder spark plugs NGK 
    • Engine dress up screw kit
    • body colour coded washer jets 
    • Airtec intercooler
    • Airtec boost pipes
    • Clubsport 4 point roll cage in nitrous blue
    • 3 point securon harness x2 
    • Driver side JCR lowered seat rail 
    #84419

    Ronaldinio
    Participant

    UK - England

    Posts: 61

    Thanks Hammy

    What D/S map do you run on yours?

    What would you recommend for a stock car perhaps air filter/cat back exhaust.

    #84472

    Hammy
    Participant

    UK - Scotland

    Posts: 649

    @Ronaldinio

     

    I am running ultima 2+ just now have a tiny flat spot just above 2000rpm until 2500rpm but I think that’s down to me having a std recirculating valve i.e basically passing.

     

    I don’t like recommending anything to anybody because lets face it there to many people like a moan me included in that.

    but can tell you a cat back will give you no power gains only noise gains and look gain that’s it.

    the std exhaust on the car is very simple 2 parts.

    cat/downpipe has a 2 bolt flange at turbo end and v band after the cat and the cat is 400cell or 300cell.

    cat back has a v band after the cat straight pipe no centre resonator only one part rolled i.e squashed then the back box. this can be taken out in one piece have did it my self.

    but if you watch a million you tube videos they say cut it after axle. the problem with that is you can never put the std one back because you have cut it. I think its more the truth people rushing out to buy that shit mountune v1 cat back what ever it was when the car was realised. not one including mountune did any proper understanding to get it out it was more like get it out there make money until now basically there on about version ten.

     

    my advise to anybody is do your home work actually think what you want to do to there car and where you want it to be, because there is a million different factors out there i.e  warranties, insurance, cost, what you use it for, etc etc

     

    hope this helps a bit



    • Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
    • Dreamscience Imap Ultimate 3+
    • Dmb Gel Badges Nitrous Blue
    • Rallyflapz Kaylan Black 
    • Team Heko Wind defectors Dark 
    • Dreamscience turbo back exhaust with race car.
    • Airtec SSC Black
    • Airtec Stage 2 Air Intake Black & Nitrous Blue 
    • Airtec Rear Diffuser Black 
    • ST suspension 12.5mm spacers
    • Forge recirculating valve
    • yellow fog lights 
    • Airtec Nitrous Blue rear diff cooler 
    • 10% tint on rear lights 
    • Satin black window louver vents
    • Airtec short shifter set @ 40%
    • Valve delete mod
    • Bonnet struts 
    • Solid shifter bushes 
    • 1 step colder spark plugs NGK 
    • Engine dress up screw kit
    • body colour coded washer jets 
    • Airtec intercooler
    • Airtec boost pipes
    • Clubsport 4 point roll cage in nitrous blue
    • 3 point securon harness x2 
    • Driver side JCR lowered seat rail 
    #84900

    Ronaldinio
    Participant

    UK - England

    Posts: 61

    Hammy whats the crack with Dreamscience map and Ghost any ideas

    #84917

    Hammy
    Participant

    UK - Scotland

    Posts: 649

    Would not touch ghost with a barge pole mate



    • Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
    • Dreamscience Imap Ultimate 3+
    • Dmb Gel Badges Nitrous Blue
    • Rallyflapz Kaylan Black 
    • Team Heko Wind defectors Dark 
    • Dreamscience turbo back exhaust with race car.
    • Airtec SSC Black
    • Airtec Stage 2 Air Intake Black & Nitrous Blue 
    • Airtec Rear Diffuser Black 
    • ST suspension 12.5mm spacers
    • Forge recirculating valve
    • yellow fog lights 
    • Airtec Nitrous Blue rear diff cooler 
    • 10% tint on rear lights 
    • Satin black window louver vents
    • Airtec short shifter set @ 40%
    • Valve delete mod
    • Bonnet struts 
    • Solid shifter bushes 
    • 1 step colder spark plugs NGK 
    • Engine dress up screw kit
    • body colour coded washer jets 
    • Airtec intercooler
    • Airtec boost pipes
    • Clubsport 4 point roll cage in nitrous blue
    • 3 point securon harness x2 
    • Driver side JCR lowered seat rail 
    #84934

    evodean
    Participant

    UK - England

    Posts: 15

    What are the issues with the ghost ?? I’ve just had a red edition and waiting to have one fitted

    #84941

    9designs
    Participant

    UK - England

    Posts: 2004

    No issue with Ghost, when fitted correctly.    Map I would go Mountune 375 until warranty ends then do their 400 map or Revo stage 2 with sports cat and standard exhaust. Just my view.



    Magnetic Grey with all the best bits

    FPM375/COBB/MSD-  Quaife LSD,  DSC+Tractive  Suspension,  HJS200 cell sports cat and MT Cooler. Sync3 upgrade.

    Was UK seller for DSC & Tractive  Active suspension !!!

        

    #84951

    GrumpyPappa
    Participant

    UK - England

    Posts: 227

    The ghost is a no brainer, as even if idiot trying to steal your hard earned car has some how got your keys either cloned or broken into house and has keys , they are going no where without your Unique code you choose.

    I would now ever say you need Chris Preston to fit it.

     

    #84984

    Hammy
    Participant

    UK - Scotland

    Posts: 649

    Get away with this ghost piss it has its own thread

     



    • Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
    • Dreamscience Imap Ultimate 3+
    • Dmb Gel Badges Nitrous Blue
    • Rallyflapz Kaylan Black 
    • Team Heko Wind defectors Dark 
    • Dreamscience turbo back exhaust with race car.
    • Airtec SSC Black
    • Airtec Stage 2 Air Intake Black & Nitrous Blue 
    • Airtec Rear Diffuser Black 
    • ST suspension 12.5mm spacers
    • Forge recirculating valve
    • yellow fog lights 
    • Airtec Nitrous Blue rear diff cooler 
    • 10% tint on rear lights 
    • Satin black window louver vents
    • Airtec short shifter set @ 40%
    • Valve delete mod
    • Bonnet struts 
    • Solid shifter bushes 
    • 1 step colder spark plugs NGK 
    • Engine dress up screw kit
    • body colour coded washer jets 
    • Airtec intercooler
    • Airtec boost pipes
    • Clubsport 4 point roll cage in nitrous blue
    • 3 point securon harness x2 
    • Driver side JCR lowered seat rail 
    #85295

    grethch
    Participant

    Germany

    Posts: 22

    1. Does anybody here run the Dreamscience 2+ map with a bigger intercooler and a sportcat/downpipe? And is the tiny flat spot just above 2000rpm until 2500 gone with this package?
Viewing 14 posts - 136 through 149 (of 149 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to Dream Science Ultima Remap.. If you're not already a member then you can register for free!