Dream Science Ultima Remap.

Log in to reply

Home Forums Performance Electronics/ECU Dream Science Ultima Remap.

Viewing 15 posts - 106 through 120 (of 149 total)
  • Author
    Posts
  • #78363

    Defoe18
    Participant

    UK - England

    Posts: 323

    Would I benefit from uprated wastegate and recirculating valve

    #78369

    71-bda
    Participant

    UK - England

    Posts: 9258

    the car might benefit but you wont when it robs you of your car warranty !!



    No nothing.

    No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

    No tackiness.

    Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

    Innit?

     

    #78372

    Hammy
    Participant

    UK - Scotland

    Posts: 649

    It’s basically dealers discretion plenty of people have this and have took the car back for warranty work so would not say it robs you of it. Because that is false and misleading.

    And the end of the day it can be took off any time.

     

    And i fully don’t believe that them  counting your turn key cycle because if you disconnect your battery for more than ten mins it wipes it. your car does not have the memory capacity to hold data for such a long time.

     

    So just to clear up some fake news.



    • Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
    • Dreamscience Imap Ultimate 3+
    • Dmb Gel Badges Nitrous Blue
    • Rallyflapz Kaylan Black 
    • Team Heko Wind defectors Dark 
    • Dreamscience turbo back exhaust with race car.
    • Airtec SSC Black
    • Airtec Stage 2 Air Intake Black & Nitrous Blue 
    • Airtec Rear Diffuser Black 
    • ST suspension 12.5mm spacers
    • Forge recirculating valve
    • yellow fog lights 
    • Airtec Nitrous Blue rear diff cooler 
    • 10% tint on rear lights 
    • Satin black window louver vents
    • Airtec short shifter set @ 40%
    • Valve delete mod
    • Bonnet struts 
    • Solid shifter bushes 
    • 1 step colder spark plugs NGK 
    • Engine dress up screw kit
    • body colour coded washer jets 
    • Airtec intercooler
    • Airtec boost pipes
    • Clubsport 4 point roll cage in nitrous blue
    • 3 point securon harness x2 
    • Driver side JCR lowered seat rail 
    #78373

    Hammy
    Participant

    UK - Scotland

    Posts: 649

    A piston type wastegate or dump valve. Is always more superior than a diaphram one.

     

    To raise the boost its the spring inside the wastegate or dump valve that changes the boost pressure. That’s why there an option if you order forge. The montune one is just pistion design with the same boost pressures as standard one.

     

    Wastegate are a funny thing you can screw up more boost but you are limited to what the turbo can boost to anyways.



    • Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
    • Dreamscience Imap Ultimate 3+
    • Dmb Gel Badges Nitrous Blue
    • Rallyflapz Kaylan Black 
    • Team Heko Wind defectors Dark 
    • Dreamscience turbo back exhaust with race car.
    • Airtec SSC Black
    • Airtec Stage 2 Air Intake Black & Nitrous Blue 
    • Airtec Rear Diffuser Black 
    • ST suspension 12.5mm spacers
    • Forge recirculating valve
    • yellow fog lights 
    • Airtec Nitrous Blue rear diff cooler 
    • 10% tint on rear lights 
    • Satin black window louver vents
    • Airtec short shifter set @ 40%
    • Valve delete mod
    • Bonnet struts 
    • Solid shifter bushes 
    • 1 step colder spark plugs NGK 
    • Engine dress up screw kit
    • body colour coded washer jets 
    • Airtec intercooler
    • Airtec boost pipes
    • Clubsport 4 point roll cage in nitrous blue
    • 3 point securon harness x2 
    • Driver side JCR lowered seat rail 
    #78412

    Defoe18
    Participant

    UK - England

    Posts: 323

    Has anyone added a wastegate with stronger spring and a uprated re circ valve to the ultima map,I have 99+ installed and still think it should have or hold more boost

    any suggestions appreciated

    #78413

    Defoe18
    Participant

    UK - England

    Posts: 323

    Thanks guys

    #78414

    ipwnswiss
    Participant

    Switzerland

    Posts: 242

    i bought the wastegate but did not change it so far. it is with the higher spring in it. but with the ultima map I already had something around 1,7-1,8bar boost. and i was not sure if I change wastegate if then the CEL will go on so it is not fitted so far.



    Ford Focus RS / frozen white / fifteen52 tarmac / lowering springs kw / milltek exhaust / exhaust valve deleter / K&N airfilter / Maxton rear upper spoiler / Mishimoto oil cooler / Auto specialist 40% short shifter /

    #78437

    Hammy
    Participant

    UK - Scotland

    Posts: 649

    @ipwnswiss

    what wastegate actuator and spring you got?



    • Magnetic, Forge wheels, Edge Protectors , Lux Pack & Recaro Shell Seats
    • Dreamscience Imap Ultimate 3+
    • Dmb Gel Badges Nitrous Blue
    • Rallyflapz Kaylan Black 
    • Team Heko Wind defectors Dark 
    • Dreamscience turbo back exhaust with race car.
    • Airtec SSC Black
    • Airtec Stage 2 Air Intake Black & Nitrous Blue 
    • Airtec Rear Diffuser Black 
    • ST suspension 12.5mm spacers
    • Forge recirculating valve
    • yellow fog lights 
    • Airtec Nitrous Blue rear diff cooler 
    • 10% tint on rear lights 
    • Satin black window louver vents
    • Airtec short shifter set @ 40%
    • Valve delete mod
    • Bonnet struts 
    • Solid shifter bushes 
    • 1 step colder spark plugs NGK 
    • Engine dress up screw kit
    • body colour coded washer jets 
    • Airtec intercooler
    • Airtec boost pipes
    • Clubsport 4 point roll cage in nitrous blue
    • 3 point securon harness x2 
    • Driver side JCR lowered seat rail 
    #78447

    ipwnswiss
    Participant

    Switzerland

    Posts: 242

    @Hammy

    Ordered the Forge motorsport actuator with the blue spring. there are 3 types available. yellow(stock) then blue and at least the red.

    But as written above, did not try it so far. Maybe by next workshop visit for coil over I will have a look for it.

     


    @Paul

    Did never use the 99+ map, only from stock up to Ultima. Stock I was around 1,1 to 1.2 boost. hard to say but with ultima clearly over 1.7 to 1.8 boost.

     



    Ford Focus RS / frozen white / fifteen52 tarmac / lowering springs kw / milltek exhaust / exhaust valve deleter / K&N airfilter / Maxton rear upper spoiler / Mishimoto oil cooler / Auto specialist 40% short shifter /

    #78610

    Defoe18
    Participant

    UK - England

    Posts: 323

    I have recently px a Focus St mk3 which was mapped up and had the same torque as a standard RS,on collecting the RS I was a little disappointed with its standard performance ,it didn’t feel as lively as the ST,and I think once moving it would be close to the RS apart from wheel spin.

    just installed Dreamscience imap ,first race99+ which was a improvement and yesterday the Ultima,and wow what a difference,that’s how the RS should be,a fantastic map and so easy to use

    #78612

    Defoe18
    Participant

    UK - England

    Posts: 323

    Thanks good advice,was more for reliability as they say standard wastegate and recirc valve not good for increased boost.

    yes mine is around 1.7 to 1.8 on the Ultima map,it feels great and makes you smile every time you nail it lol

    #78613

    Defoe18
    Participant

    UK - England

    Posts: 323

    Has anyone tried the ultima 2, I have only just got my handset and it is pre loaded on,think I will wait to I get bored with ultima

    #78621

    craigyp
    Participant

    UK - England

    Posts: 80

    Im running ultima 2+

    #78622

    ipwnswiss
    Participant

    Switzerland

    Posts: 242

    as Hammy wrote in an other thread already the Ultima 2 or 2+ is not full stock car. some hard mods are needed like sports cat or de-catted exhaust system. intercooler. hard charging pipe and some stuff. I just run the Ultima because no intercooler or hard chargepipe so far. only exhaust system and air filter. no intake mods or anything. will wait until car was at Ford for pressure test and HG replacement or what ever the test will show. after that the MODDING will move on a next level 😀



    Ford Focus RS / frozen white / fifteen52 tarmac / lowering springs kw / milltek exhaust / exhaust valve deleter / K&N airfilter / Maxton rear upper spoiler / Mishimoto oil cooler / Auto specialist 40% short shifter /

    #78629

    jonny1984
    Participant

    UK - England

    Posts: 15

Viewing 15 posts - 106 through 120 (of 149 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to Dream Science Ultima Remap.. If you're not already a member then you can register for free!