Home › Forums › Performance › Engine › Ford Performance Built Engine Bargain
This is a bargain build for the spec it’s awesome.
M-6009-23EB – $6,485.00 – £4900
The Ford Performance 2.3L EcoBeast shortblock is an excellent starting point for a Mustang EcoBoost or Focus RS engine build-up.
Focus RS block w/Mustang motor mount bosses (can be removed for RS installation)
Deck cooling jacket insert for additional bore strength
Callies lightened forged crankshaft (9 lbs lighter than stock) – Cryogenic stress relieved w/added keyway
Callies Compstar H-beam connecting rods w/ARP2000 rod bolts
Mahle forged 2618 pistons – 9.5:1 compression ratio
Includes: oil pump and chaindrive, damper w/keyway, damper bolt, oil filter, head gasket
Tested to 500hp and 415 ft/lb of torque
Fits 2015-2022 Mustang 2.3L and 2016-2018 Focus RS
Recommended oil pick-up tubes/oil pan:
Mustang – LR3Z-6622-A pick-up tube / FR3Z-6675-B oil pan
Focus RS – EJ7Z-6622-A pick-up tube / G1FZ-6675-B oil pan
https://performanceparts.ford.com/part/M-6009-23EB
RS Edition.
FPM375 Rocks
The rest of the “M” maps suck
If the wife wasn’t beading me dry I would be all over that👍😉
Collins Cp2 map. Ramair induction. Mountune mud flaps. Scorpion Sports Cat. Scorpion Tracker. Wind deflectors. NB washer jets and shark fin aerial. EBC Grooved discs, YellowStuff pads. Airtec Intercooler, Miltek cat back with titanium tips. Collins quickshift. DSC Controller
Thats not a lot of torque though is it 🤔
SABRE
666.6 bhp 99 oct & wmi
558 lbft
OEMeth installs
Aquamist
sabre tuning
Spec-R
J9-performance
funk motorsport
Hel
Owen developments
WP Pro brakes
HELIX Automotive
KW suspensions
Barney Build
Grant Motorsport
Big Si…………………… Followed by a big Hmmmmm …………
Just look at the spec and you know that kits but their you go rubbishing a good product…….. again!!!!!!
Like all things Ford; they rate the Coyote V8 at 545hp but they get built to over 1200hp it’s just a Ford number for their protection.
Its a Callies light weight crank I’m sure you’ve used that in a 800+hp builds running this upgrade over factory
Mahle pistons are running in mine and yours, what did Mountune say the torque was on your M520? weren’t you running 700+ Nm …………
Callis Compstar rods aren’t they 800-1000 hp rating
All inside a brand new Ford Performance motorsport block, RS or Mustang ready, or Mk2 escort ready; now that would be fun.
And finished off with looks like a Mountune USA deck brace.
Like I said it’s a performance bargain, a short block bargain
RS Edition.
FPM375 Rocks
The rest of the “M” maps suck
Where have i stated im rubbishing a product?
SABRE
666.6 bhp 99 oct & wmi
558 lbft
OEMeth installs
Aquamist
sabre tuning
Spec-R
J9-performance
funk motorsport
Hel
Owen developments
WP Pro brakes
HELIX Automotive
KW suspensions
Barney Build
Grant Motorsport
Alot cheaper than i paid haha.
440bhp
443lbft
Just re read it and il say it again its not a lot if torque
stock stage 2 tunes push out 420lbft
stock engines on meth run 498lbft
Again so your not confused i am not rubbishing a product just mearly surprised that its only been tested to 415lbft
i still think the Mountune short block is is decent and well worth the $4995 at the time its now $5800
you can keyway a crank for £50 and lighten and balance one for £100
that would be a close call to decide between the two
SABRE
666.6 bhp 99 oct & wmi
558 lbft
OEMeth installs
Aquamist
sabre tuning
Spec-R
J9-performance
funk motorsport
Hel
Owen developments
WP Pro brakes
HELIX Automotive
KW suspensions
Barney Build
Grant Motorsport
have to agree the Ford stated figure is low. What’s the factory crank rated at and how much does that take.
The Callies crank is an upgrade option from Mountune on their built motors As too are the Mahle pistons, as to is a deck brace or a welded deck brace.
Yes the figure quoted are low; but you know the pistons are good for at least 800hp with matching torque and the new Callies crank in conjunction with a Single mass flywheel should make itv rev like a Fireblade
When I asked you about doing this “you can keyway a crank for £50 and lighten and balance one for £100” – you said you don’t do it in the group txt and only fit new.
I really don’t know why your being so negative on this bargain 800+bhp short block.
RS Edition.
FPM375 Rocks
The rest of the “M” maps suck
Couple of Companies here sell the short block engines too. I’m sure I seen one, think they’re based in Ireland could be wrong but will build it using your current parts to save money on forged parts if you already have them.
Would delivery of that not end up taking the price up to about the same as one here 🤔