MUDFLAPS….. WOO-HOO!!

Log in to reply

Home Forums Styling Exterior Styling MUDFLAPS….. WOO-HOO!!

Viewing 15 posts - 1 through 15 (of 63 total)
  • Author
    Posts
  • #134936

    brembo
    Participant

    UK - Scotland

    Posts: 1730

    Afternoon all… and @71-bda.

    So I finally got round to fitting my Mud Flaps yesterday. After humming and haying for quite some time I finally took the plunge. The reason for the hold up was due to me not being a massive fan of Mud Flaps but I must say these are really growing on me.
    After fitting them I still wasn’t too sure but when I refitted the wheels and got the RS back down on to the ground I was most impressed!!
    Even though my RS is on Mountune Springs with H&R 15mm Wheel Spacers the Mud Flaps give an extra look of width and make the RS look even better in my opinion!! Oh, and they come right up and meet my baby flaps, just nice!! ??.

    Cheers, Marc.



    MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

    #134937

    bobcat
    Participant

    UK - England

    Posts: 11544

    @brembo, looking good, congratulations on getting round to fitting your flaps.



    Honorary Member

     

    #134938

    brembo
    Participant

    UK - Scotland

    Posts: 1730

    Cheers, Marc.



    MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

    #134939

    brembo
    Participant

    UK - Scotland

    Posts: 1730

    @bobcat

    Cheers mate!! See if they help keep her a bit cleaner?? Lol!! ??.

    Cheers, Marc.



    MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

    #134942

    71-bda
    Participant

    UK - England

    Posts: 9166

    nice one Marc , at bloody last eh !!  I thought I was slow taking about 18 months from picking the car up to fitting, but you have done me there. Looks proper purposeful now innit! looking very clean too . Nice.



    No nothing.

    No Mods. No rockers. Just a chunky knob, thats now been replaced by an RS knob innit.

    No tackiness.

    Std as Ford intended, but with a space saver wheel and jack and nuts and wheel brace. oh.. and flaps, a man has got to have flaps.

    Innit?

     

    #134943

    bobcat
    Participant

    UK - England

    Posts: 11544

    The only thing I can say is that it takes longer for it to get dirty. The flaps really do help. Like the way they meet the mini flaps.



    Honorary Member

     

    #134947

    brembo
    Participant

    UK - Scotland

    Posts: 1730

    @71-bda

    Haha… yeah took a while but your pestering paid off!! Lol!! Should’ve fitted them long ago mate!! ??.

    Cheers, Marc.



    MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

    #134948

    daddy999
    Participant

    UK - England

    Posts: 30

    Hi Marc

    What make are they?

    Tony

    #134951

    brembo
    Participant

    UK - Scotland

    Posts: 1730

    @daddy999

    Afternoon Tony. They are Rallyflapz 4mm PVC from the Club shop. Currently £79. They look a lot better on the car than I thought they were going to and the rear ones come up and meet the baby flaps in the rear arch so you’re not left with a gap.

    Cheers, Marc.



    MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

    #134952

    DarkHorse
    Participant

    UK - England

    Posts: 280

    @brembo

    Marc, flaps looking good! I’ve got the Kaylan ones which are excellent. Didn’t espy the Remus stickers on your car or are they hidden from view?

    #134953

    brembo
    Participant

    UK - Scotland

    Posts: 1730

    @darkhorse

    Afternoon mate!! Stickers not on yet, the next time I wash the RS and it’s not freezing cold I’ll stick them on and see how they look. I’ll post a pic when I do. ?.

    Cheers, Marc.



    MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

    #134955

    paul-m
    Participant

    UK - England

    Posts: 646

    Looking good Marc, must get some for mine sometime.

    #134959

    brembo
    Participant

    UK - Scotland

    Posts: 1730

    @paul-m

    Indeed mate!! I can only advise that you get them sooner rather than later. Upon close inspection I had loads of stone chips on the rear edges of the front wings that I had to touch in before fitting the Flaps!! That areas are all protected now. ?.

    Cheers, Marc.



    MY/17, F/White, Forged Black Wheels, Recaro Shell Seats, Diamas SiRamik Glasscoat, H&R Anti-Roll Bars/15mm Spacers, EBC Turbo Brake Discs all round/Yellowstuff Brake Pads, Mountune Air Intake/Recirc Valve/SSC/Blue Turbo Hose Kit and Hard Pipe/Uprated Springs/Short Shifter/Rear Motor Mount/Crank Breather Plate, ETS Intercooler, Milltek 100 Cell Cat, Remus Wolf Inside Exhaust, Litchfield Stage 2 map via Cobb Accessport V3, DSC unit.

    #134977

    GM
    Participant

    UK - Wales

    Posts: 2841

    @brembo nice flaps ? Ive got the flap and gap, should of gone for longer flaps not the RA MTune ones ?

    #134987

    stu-c
    Participant

    UK - England

    Posts: 944

    I’ve been thinking about the Mountune ones for a while.now but not got round to it. Be good to see some photos when you get chance.

    Cheers

    Stu



    NB FPM375

Viewing 15 posts - 1 through 15 (of 63 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to MUDFLAPS….. WOO-HOO!!. If you're not already a member then you can register for free!