Who gone for Devils a 530 package or Sabre 550

Log in to reply

Home Forums Performance Engine Who gone for Devils a 530 package or Sabre 550

Viewing 15 posts - 1 through 15 (of 289 total)
  • Author
    Posts
  • #179609

    robroy
    Participant

    UK - England

    Posts: 692

    Who has spent out on either conversion from a stage 2 car , interested to know how they both drive and perform etc.
    2 different turbos Nx2 for devils and Garrett G series turbo for sabre

    #179623

    GM
    Participant

    UK - Wales

    Posts: 2841

    What about the Sabre 684 package? đŸ€­

    #179641

    white-rs2
    Participant

    UK - England

    Posts: 4832

    I understand it that’s Devils capped their 530 tune as a customer cost cap as anymore power and torque and this would of added an additional bill of £1500 ish as a new clutch would then be required.

    The Devils 530 using the NX2 turbo, this is at least 100/100+ bhp shy of where it could be if you swap out the clutch and add fuelling.

    The NX2 mapped right drives almost like factory



    RS Edition.

    FPM375 Rocks

    The rest of the “M” maps suck

    #179655

    robroy
    Participant

    UK - England

    Posts: 692

    @gm

    Devils have hit more than 530 they had one running near 700 bhp ages ago  but that’s not the question

    @white-rs

    Yeah understand that,  530 is fine for me , until I get bored 😅

    Is just fueling  enough though on the standard  ecu for the extra bhp ??

    #179660

    Brian C
    Participant

    UK - Scotland

    Posts: 193

    Mine is at devils getting the 530 modifications finished as we speak. Can’t wait to get it back

    #179661

    white-rs2
    Participant

    UK - England

    Posts: 4832

    Factory ECU is a good unit, the factory injectors must be maxed at that power level.



    RS Edition.

    FPM375 Rocks

    The rest of the “M” maps suck

    #179669

    robroy
    Participant

    UK - England

    Posts: 692

    I did see msd now have a msd700 that due to be ready soon , or may be ready ?

    #179670

    robroy
    Participant

    UK - England

    Posts: 692

    @brian c

    Excellent , you having cams too ?

    Be great to hear what you think when you get it back đŸ€©

    #179676

    GM
    Participant

    UK - Wales

    Posts: 2841

    @robroy i know the owner is a real good bloke….. Now a yaris owner tho, might not want his review / thoughts on things 😆

     

    #179681

    robroy
    Participant

    UK - England

    Posts: 692

    @GM

    The owner of the devils big bhp car ?

    I chatted to him via messenger, he basically bought the car and went straight to the garage 😼

    #179685

    Brian C
    Participant

    UK - Scotland

    Posts: 193

    Yeah I went for piper 270 camshafts, ported head with oversized valves and a 2 litre bottom end with oversized pistons. Hopefully it will make over the 530 bhp. It’s been a bit of a headache for them to get tuned, which they are putting down to the ported head. The boost was coming in earlier than expected and throwing up an overboost fault plus other fault codes. Spoke to them today and they told me it won’t be long now, jst the fine tuning to do now. Been with them for a while now but to be fair to them it wasn’t booked in for the work that has been done. Was originally only going to get tuned.

    Been a rollercoaster of ups and mostly downs doing this serious a tune, so be prepared if your planning on going down this road. UPS lost my original cylinder head and before Devils got the car I forged the bottom end with a local engine builder which failed after 100 miles.

    Wish I had went to Devils in the first place as I’d have saved a lot of money and stress but fingers crossed I’ll have it back in the next couple of weeks.

    If you do decide to go for Sabre or Devils I hope everything goes a lot better than it has for me lol

    #179692

    GM
    Participant

    UK - Wales

    Posts: 2841

    @robroy this one….? big money spent.

    #179699

    robroy
    Participant

    UK - England

    Posts: 692

    @gm

    No I think it was blue ,I think he was on this site

    #179703

    robroy
    Participant

    UK - England

    Posts: 692

    @brian c

    What a nightmare !

    I will be using standard head , i have the same cams fitted piper 270 (stage 2 ) , did they recommend them ?

    Think they were using stage 3 cams

    #179706

    Brian C
    Participant

    UK - Scotland

    Posts: 193

    Well in my original head I used 285 cams, which I lost.

    I then bought a new head which devils supplied with 270 cams. I asked them if I would be better with 285’s and they said it wouldn’t make much of a difference with the 270’s plus it idles a lot smoother. If you speak to them they will be more than happy to explain everything to you, they’ve always be very open and helpful to me.

Viewing 15 posts - 1 through 15 (of 289 total)
  • You must be logged in to reply to this topic.

Please login or register to view this page.




Login or register below to contribute to Who gone for Devils a 530 package or Sabre 550. If you're not already a member then you can register for free!